Writing an LLVM Pass

Introduction — What is a pass?

The LLVM Pass Framework is an important part of the LLVM system, because LLVM passes are where most of the interesting parts of the compiler exist. Passes perform the transformations and optimizations that make up the compiler, they build the analysis results that are used by these transformations, and they are, above all, a structuring technique for compiler code.

All LLVM passes are subclasses of the Pass class, which implement functionality by overriding virtual methods inherited from Pass. Depending on how your pass works, you should inherit from the ModulePass , CallGraphSCCPass, FunctionPass , or LoopPass, or RegionPass classes, which gives the system more information about what your pass does, and how it can be combined with other passes. One of the main features of the LLVM Pass Framework is that it schedules passes to run in an efficient way based on the constraints that your pass meets (which are indicated by which class they derive from).

We start by showing you how to construct a pass, everything from setting up the code, to compiling, loading, and executing it. After the basics are down, more advanced features are discussed.

This document deals with the legacy pass manager. LLVM is transitioning to the new pass manager, which has its own way of defining passes. For more details, see Writing an LLVM Pass.

Quick Start — Writing hello world

Here we describe how to write the “hello world” of passes. The “Hello” pass is designed to simply print out the name of non-external functions that exist in the program being compiled. It does not modify the program at all, it just inspects it. The source code and files for this pass are available in the LLVM source tree in the lib/Transforms/Hello directory.

Setting up the build environment

First, configure and build LLVM. Next, you need to create a new directory somewhere in the LLVM source base. For this example, we’ll assume that you made lib/Transforms/Hello. Finally, you must set up a build script that will compile the source code for the new pass. To do this, copy the following into CMakeLists.txt:

add_llvm_library( LLVMHello MODULE
  Hello.cpp

  PLUGIN_TOOL
  opt
  )

and the following line into lib/Transforms/CMakeLists.txt:

add_subdirectory(Hello)

(Note that there is already a directory named Hello with a sample “Hello” pass; you may play with it – in which case you don’t need to modify any CMakeLists.txt files – or, if you want to create everything from scratch, use another name.)

This build script specifies that Hello.cpp file in the current directory is to be compiled and linked into a shared object $(LEVEL)/lib/LLVMHello.so that can be dynamically loaded by the opt tool via its -load option. If your operating system uses a suffix other than .so (such as Windows or macOS), the appropriate extension will be used.

Now that we have the build scripts set up, we just need to write the code for the pass itself.

Basic code required

Now that we have a way to compile our new pass, we just have to write it. Start out with:

#include "llvm/Pass.h"
#include "llvm/IR/Function.h"
#include "llvm/Support/raw_ostream.h"

Which are needed because we are writing a Pass, we are operating on Functions, and we will be doing some printing.

Next we have:

using namespace llvm;

… which is required because the functions from the include files live in the llvm namespace.

Next we have:

namespace {

… which starts out an anonymous namespace. Anonymous namespaces are to C++ what the “static” keyword is to C (at global scope). It makes the things declared inside of the anonymous namespace visible only to the current file. If you’re not familiar with them, consult a decent C++ book for more information.

Next, we declare our pass itself:

struct Hello : public FunctionPass {

This declares a “Hello” class that is a subclass of FunctionPass. The different builtin pass subclasses are described in detail later, but for now, know that FunctionPass operates on a function at a time.

static char ID;
Hello() : FunctionPass(ID) {}

This declares pass identifier used by LLVM to identify pass. This allows LLVM to avoid using expensive C++ runtime information.

  bool runOnFunction(Function &F) override {
    errs() << "Hello: ";
    errs().write_escaped(F.getName()) << '\n';
    return false;
  }
}; // end of struct Hello
}  // end of anonymous namespace

We declare a runOnFunction method, which overrides an abstract virtual method inherited from FunctionPass. This is where we are supposed to do our thing, so we just print out our message with the name of each function.

char Hello::ID = 0;

We initialize pass ID here. LLVM uses ID’s address to identify a pass, so initialization value is not important.

static RegisterPass<Hello> X("hello", "Hello World Pass",
                             false /* Only looks at CFG */,
                             false /* Analysis Pass */);

Lastly, we register our class Hello, giving it a command line argument “hello”, and a name “Hello World Pass”. The last two arguments describe its behavior: if a pass walks CFG without modifying it then the third argument is set to true; if a pass is an analysis pass, for example dominator tree pass, then true is supplied as the fourth argument.

If we want to register the pass as a step of an existing pipeline, some extension points are provided, e.g. PassManagerBuilder::EP_EarlyAsPossible to apply our pass before any optimization, or PassManagerBuilder::EP_FullLinkTimeOptimizationLast to apply it after Link Time Optimizations.

static llvm::RegisterStandardPasses Y(
    llvm::PassManagerBuilder::EP_EarlyAsPossible,
    [](const llvm::PassManagerBuilder &Builder,
       llvm::legacy::PassManagerBase &PM) { PM.add(new Hello()); });

As a whole, the .cpp file looks like:

#include "llvm/Pass.h"
#include "llvm/IR/Function.h"
#include "llvm/Support/raw_ostream.h"

#include "llvm/IR/LegacyPassManager.h"
#include "llvm/Transforms/IPO/PassManagerBuilder.h"

using namespace llvm;

namespace {
struct Hello : public FunctionPass {
  static char ID;
  Hello() : FunctionPass(ID) {}

  bool runOnFunction(Function &F) override {
    errs() << "Hello: ";
    errs().write_escaped(F.getName()) << '\n';
    return false;
  }
}; // end of struct Hello
}  // end of anonymous namespace

char Hello::ID = 0;
static RegisterPass<Hello> X("hello", "Hello World Pass",
                             false /* Only looks at CFG */,
                             false /* Analysis Pass */);

static RegisterStandardPasses Y(
    PassManagerBuilder::EP_EarlyAsPossible,
    [](const PassManagerBuilder &Builder,
       legacy::PassManagerBase &PM) { PM.add(new Hello()); });

Now that it’s all together, compile the file with a simple “gmake” command from the top level of your build directory and you should get a new file “lib/LLVMHello.so”. Note that everything in this file is contained in an anonymous namespace — this reflects the fact that passes are self contained units that do not need external interfaces (although they can have them) to be useful.

Running a pass with opt

Now that you have a brand new shiny shared object file, we can use the opt command to run an LLVM program through your pass. Because you registered your pass with RegisterPass, you will be able to use the opt tool to access it, once loaded.

To test it, follow the example at the end of the Getting Started with the LLVM System to compile “Hello World” to LLVM. We can now run the bitcode file (hello.bc) for the program through our transformation like this (or course, any bitcode file will work):

$ opt -load lib/LLVMHello.so -hello < hello.bc > /dev/null
Hello: __main
Hello: puts
Hello: main

The -load option specifies that opt should load your pass as a shared object, which makes “-hello” a valid command line argument (which is one reason you need to register your pass). Because the Hello pass does not modify the program in any interesting way, we just throw away the result of opt (sending it to /dev/null).

To see what happened to the other string you registered, try running opt with the -help option:

$ opt -load lib/LLVMHello.so -help
OVERVIEW: llvm .bc -> .bc modular optimizer and analysis printer

USAGE: opt [subcommand] [options] <input bitcode file>

OPTIONS:
  Optimizations available:
...
    -guard-widening           - Widen guards
    -gvn                      - Global Value Numbering
    -gvn-hoist                - Early GVN Hoisting of Expressions
    -hello                    - Hello World Pass
    -indvars                  - Induction Variable Simplification
    -inferattrs               - Infer set function attributes
...

The pass name gets added as the information string for your pass, giving some documentation to users of opt. Now that you have a working pass, you would go ahead and make it do the cool transformations you want. Once you get it all working and tested, it may become useful to find out how fast your pass is. The PassManager provides a nice command line option (-time-passes) that allows you to get information about the execution time of your pass along with the other passes you queue up. For example:

$ opt -load lib/LLVMHello.so -hello -time-passes < hello.bc > /dev/null
Hello: __main
Hello: puts
Hello: main
===-------------------------------------------------------------------------===
                      ... Pass execution timing report ...
===-------------------------------------------------------------------------===
  Total Execution Time: 0.0007 seconds (0.0005 wall clock)

   ---User Time---   --User+System--   ---Wall Time---  --- Name ---
   0.0004 ( 55.3%)   0.0004 ( 55.3%)   0.0004 ( 75.7%)  Bitcode Writer
   0.0003 ( 44.7%)   0.0003 ( 44.7%)   0.0001 ( 13.6%)  Hello World Pass
   0.0000 (  0.0%)   0.0000 (  0.0%)   0.0001 ( 10.7%)  Module Verifier
   0.0007 (100.0%)   0.0007 (100.0%)   0.0005 (100.0%)  Total

As you can see, our implementation above is pretty fast. The additional passes listed are automatically inserted by the opt tool to verify that the LLVM emitted by your pass is still valid and well formed LLVM, which hasn’t been broken somehow.

Now that you have seen the basics of the mechanics behind passes, we can talk about some more details of how they work and how to use them.

Pass classes and requirements

One of the first things that you should do when designing a new pass is to decide what class you should subclass for your pass. The Hello World example uses the FunctionPass class for its implementation, but we did not discuss why or when this should occur. Here we talk about the classes available, from the most general to the most specific.

When choosing a superclass for your Pass, you should choose the most specific class possible, while still being able to meet the requirements listed. This gives the LLVM Pass Infrastructure information necessary to optimize how passes are run, so that the resultant compiler isn’t unnecessarily slow.

The ImmutablePass class

The most plain and boring type of pass is the “ImmutablePass” class. This pass type is used for passes that do not have to be run, do not change state, and never need to be updated. This is not a normal type of transformation or analysis, but can provide information about the current compiler configuration.

Although this pass class is very infrequently used, it is important for providing information about the current target machine being compiled for, and other static information that can affect the various transformations.

ImmutablePasses never invalidate other transformations, are never invalidated, and are never “run”.

The ModulePass class

The ModulePass class is the most general of all superclasses that you can use. Deriving from ModulePass indicates that your pass uses the entire program as a unit, referring to function bodies in no predictable order, or adding and removing functions. Because nothing is known about the behavior of ModulePass subclasses, no optimization can be done for their execution.

A module pass can use function level passes (e.g. dominators) using the getAnalysis interface getAnalysis<DominatorTree>(llvm::Function *) to provide the function to retrieve analysis result for, if the function pass does not require any module or immutable passes. Note that this can only be done for functions for which the analysis ran, e.g. in the case of dominators you should only ask for the DominatorTree for function definitions, not declarations.

To write a correct ModulePass subclass, derive from ModulePass and overload the runOnModule method with the following signature:

The runOnModule method

virtual bool runOnModule(Module &M) = 0;

The runOnModule method performs the interesting work of the pass. It should return true if the module was modified by the transformation and false otherwise.

The CallGraphSCCPass class

The CallGraphSCCPass is used by passes that need to traverse the program bottom-up on the call graph (callees before callers). Deriving from CallGraphSCCPass provides some mechanics for building and traversing the CallGraph, but also allows the system to optimize execution of CallGraphSCCPasses. If your pass meets the requirements outlined below, and doesn’t meet the requirements of a FunctionPass, you should derive from CallGraphSCCPass.

TODO: explain briefly what SCC, Tarjan’s algo, and B-U mean.

To be explicit, CallGraphSCCPass subclasses are:

  1. not allowed to inspect or modify any Functions other than those in the current SCC and the direct callers and direct callees of the SCC.
  2. required to preserve the current CallGraph object, updating it to reflect any changes made to the program.
  3. not allowed to add or remove SCC’s from the current Module, though they may change the contents of an SCC.
  4. allowed to add or remove global variables from the current Module.
  5. allowed to maintain state across invocations of runOnSCC (including global data).

Implementing a CallGraphSCCPass is slightly tricky in some cases because it has to handle SCCs with more than one node in it. All of the virtual methods described below should return true if they modified the program, or false if they didn’t.

The doInitialization(CallGraph &) method

virtual bool doInitialization(CallGraph &CG);

The doInitialization method is allowed to do most of the things that CallGraphSCCPasses are not allowed to do. They can add and remove functions, get pointers to functions, etc. The doInitialization method is designed to do simple initialization type of stuff that does not depend on the SCCs being processed. The doInitialization method call is not scheduled to overlap with any other pass executions (thus it should be very fast).

The runOnSCC method

virtual bool runOnSCC(CallGraphSCC &SCC) = 0;

The runOnSCC method performs the interesting work of the pass, and should return true if the module was modified by the transformation, false otherwise.

The doFinalization(CallGraph &) method

virtual bool doFinalization(CallGraph &CG);

The doFinalization method is an infrequently used method that is called when the pass framework has finished calling runOnSCC for every SCC in the program being compiled.

The FunctionPass class

In contrast to ModulePass subclasses, FunctionPass subclasses do have a predictable, local behavior that can be expected by the system. All FunctionPass execute on each function in the program independent of all of the other functions in the program. FunctionPasses do not require that they are executed in a particular order, and FunctionPasses do not modify external functions.

To be explicit, FunctionPass subclasses are not allowed to:

  1. Inspect or modify a Function other than the one currently being processed.
  2. Add or remove Functions from the current Module.
  3. Add or remove global variables from the current Module.
  4. Maintain state across invocations of runOnFunction (including global data).

Implementing a FunctionPass is usually straightforward (See the Hello World pass for example). FunctionPasses may overload three virtual methods to do their work. All of these methods should return true if they modified the program, or false if they didn’t.

The doInitialization(Module &) method

virtual bool doInitialization(Module &M);

The doInitialization method is allowed to do most of the things that FunctionPasses are not allowed to do. They can add and remove functions, get pointers to functions, etc. The doInitialization method is designed to do simple initialization type of stuff that does not depend on the functions being processed. The doInitialization method call is not scheduled to overlap with any other pass executions (thus it should be very fast).

A good example of how this method should be used is the LowerAllocations pass. This pass converts malloc and free instructions into platform dependent malloc() and free() function calls. It uses the doInitialization method to get a reference to the malloc and free functions that it needs, adding prototypes to the module if necessary.

The runOnFunction method

virtual bool runOnFunction(Function &F) = 0;

The runOnFunction method must be implemented by your subclass to do the transformation or analysis work of your pass. As usual, a true value should be returned if the function is modified.

The doFinalization(Module &) method

virtual bool doFinalization(Module &M);

The doFinalization method is an infrequently used method that is called when the pass framework has finished calling runOnFunction for every function in the program being compiled.

The LoopPass class

All LoopPass execute on each loop in the function independent of all of the other loops in the function. LoopPass processes loops in loop nest order such that outer most loop is processed last.

LoopPass subclasses are allowed to update loop nest using LPPassManager interface. Implementing a loop pass is usually straightforward. LoopPasses may overload three virtual methods to do their work. All these methods should return true if they modified the program, or false if they didn’t.

A LoopPass subclass which is intended to run as part of the main loop pass pipeline needs to preserve all of the same function analyses that the other loop passes in its pipeline require. To make that easier, a getLoopAnalysisUsage function is provided by LoopUtils.h. It can be called within the subclass’s getAnalysisUsage override to get consistent and correct behavior. Analogously, INITIALIZE_PASS_DEPENDENCY(LoopPass) will initialize this set of function analyses.

The doInitialization(Loop *, LPPassManager &) method

virtual bool doInitialization(Loop *, LPPassManager &LPM);

The doInitialization method is designed to do simple initialization type of stuff that does not depend on the functions being processed. The doInitialization method call is not scheduled to overlap with any other pass executions (thus it should be very fast). LPPassManager interface should be used to access Function or Module level analysis information.

The runOnLoop method

virtual bool runOnLoop(Loop *, LPPassManager &LPM) = 0;

The runOnLoop method must be implemented by your subclass to do the transformation or analysis work of your pass. As usual, a true value should be returned if the function is modified. LPPassManager interface should be used to update loop nest.

The doFinalization() method

virtual bool doFinalization();

The doFinalization method is an infrequently used method that is called when the pass framework has finished calling runOnLoop for every loop in the program being compiled.

The RegionPass class

RegionPass is similar to LoopPass, but executes on each single entry single exit region in the function. RegionPass processes regions in nested order such that the outer most region is processed last.

RegionPass subclasses are allowed to update the region tree by using the RGPassManager interface. You may overload three virtual methods of RegionPass to implement your own region pass. All these methods should return true if they modified the program, or false if they did not.

The doInitialization(Region *, RGPassManager &) method

virtual bool doInitialization(Region *, RGPassManager &RGM);

The doInitialization method is designed to do simple initialization type of stuff that does not depend on the functions being processed. The doInitialization method call is not scheduled to overlap with any other pass executions (thus it should be very fast). RPPassManager interface should be used to access Function or Module level analysis information.

The runOnRegion method

virtual bool runOnRegion(Region *, RGPassManager &RGM) = 0;

The runOnRegion method must be implemented by your subclass to do the transformation or analysis work of your pass. As usual, a true value should be returned if the region is modified. RGPassManager interface should be used to update region tree.

The doFinalization() method

virtual bool doFinalization();

The doFinalization method is an infrequently used method that is called when the pass framework has finished calling runOnRegion for every region in the program being compiled.

The MachineFunctionPass class

A MachineFunctionPass is a part of the LLVM code generator that executes on the machine-dependent representation of each LLVM function in the program.

Code generator passes are registered and initialized specially by TargetMachine::addPassesToEmitFile and similar routines, so they cannot generally be run from the opt or bugpoint commands.

A MachineFunctionPass is also a FunctionPass, so all the restrictions that apply to a FunctionPass also apply to it. MachineFunctionPasses also have additional restrictions. In particular, MachineFunctionPasses are not allowed to do any of the following:

  1. Modify or create any LLVM IR Instructions, BasicBlocks, Arguments, Functions, GlobalVariables, GlobalAliases, or Modules.
  2. Modify a MachineFunction other than the one currently being processed.
  3. Maintain state across invocations of runOnMachineFunction (including global data).

The runOnMachineFunction(MachineFunction &MF) method

virtual bool runOnMachineFunction(MachineFunction &MF) = 0;

runOnMachineFunction can be considered the main entry point of a MachineFunctionPass; that is, you should override this method to do the work of your MachineFunctionPass.

The runOnMachineFunction method is called on every MachineFunction in a Module, so that the MachineFunctionPass may perform optimizations on the machine-dependent representation of the function. If you want to get at the LLVM Function for the MachineFunction you’re working on, use MachineFunction’s getFunction() accessor method — but remember, you may not modify the LLVM Function or its contents from a MachineFunctionPass.

Pass registration

In the Hello World example pass we illustrated how pass registration works, and discussed some of the reasons that it is used and what it does. Here we discuss how and why passes are registered.

As we saw above, passes are registered with the RegisterPass template. The template parameter is the name of the pass that is to be used on the command line to specify that the pass should be added to a program (for example, with opt or bugpoint). The first argument is the name of the pass, which is to be used for the -help output of programs, as well as for debug output generated by the –debug-pass option.

If you want your pass to be easily dumpable, you should implement the virtual print method:

The print method

virtual void print(llvm::raw_ostream &O, const Module *M) const;

The print method must be implemented by “analyses” in order to print a human readable version of the analysis results. This is useful for debugging an analysis itself, as well as for other people to figure out how an analysis works. Use the opt -analyze argument to invoke this method.

The llvm::raw_ostream parameter specifies the stream to write the results on, and the Module parameter gives a pointer to the top level module of the program that has been analyzed. Note however that this pointer may be NULL in certain circumstances (such as calling the Pass::dump() from a debugger), so it should only be used to enhance debug output, it should not be depended on.

Specifying interactions between passes

One of the main responsibilities of the PassManager is to make sure that passes interact with each other correctly. Because PassManager tries to optimize the execution of passes it must know how the passes interact with each other and what dependencies exist between the various passes. To track this, each pass can declare the set of passes that are required to be executed before the current pass, and the passes which are invalidated by the current pass.

Typically this functionality is used to require that analysis results are computed before your pass is run. Running arbitrary transformation passes can invalidate the computed analysis results, which is what the invalidation set specifies. If a pass does not implement the getAnalysisUsage method, it defaults to not having any prerequisite passes, and invalidating all other passes.

The getAnalysisUsage method

virtual void getAnalysisUsage(AnalysisUsage &Info) const;

By implementing the getAnalysisUsage method, the required and invalidated sets may be specified for your transformation. The implementation should fill in the AnalysisUsage object with information about which passes are required and not invalidated. To do this, a pass may call any of the following methods on the AnalysisUsage object:

The AnalysisUsage::addRequired<> and AnalysisUsage::addRequiredTransitive<> methods

If your pass requires a previous pass to be executed (an analysis for example), it can use one of these methods to arrange for it to be run before your pass. LLVM has many different types of analyses and passes that can be required, spanning the range from DominatorSet to BreakCriticalEdges. Requiring BreakCriticalEdges, for example, guarantees that there will be no critical edges in the CFG when your pass has been run.

Some analyses chain to other analyses to do their job. For example, an AliasAnalysis <AliasAnalysis> implementation is required to chain to other alias analysis passes. In cases where analyses chain, the addRequiredTransitive method should be used instead of the addRequired method. This informs the PassManager that the transitively required pass should be alive as long as the requiring pass is.

The AnalysisUsage::addPreserved<> method

One of the jobs of the PassManager is to optimize how and when analyses are run. In particular, it attempts to avoid recomputing data unless it needs to. For this reason, passes are allowed to declare that they preserve (i.e., they don’t invalidate) an existing analysis if it’s available. For example, a simple constant folding pass would not modify the CFG, so it can’t possibly affect the results of dominator analysis. By default, all passes are assumed to invalidate all others.

The AnalysisUsage class provides several methods which are useful in certain circumstances that are related to addPreserved. In particular, the setPreservesAll method can be called to indicate that the pass does not modify the LLVM program at all (which is true for analyses), and the setPreservesCFG method can be used by transformations that change instructions in the program but do not modify the CFG or terminator instructions.

addPreserved is particularly useful for transformations like BreakCriticalEdges. This pass knows how to update a small set of loop and dominator related analyses if they exist, so it can preserve them, despite the fact that it hacks on the CFG.

Example implementations of getAnalysisUsage

// This example modifies the program, but does not modify the CFG
void LICM::getAnalysisUsage(AnalysisUsage &AU) const {
  AU.setPreservesCFG();
  AU.addRequired<LoopInfoWrapperPass>();
}

The getAnalysis<> and getAnalysisIfAvailable<> methods

The Pass::getAnalysis<> method is automatically inherited by your class, providing you with access to the passes that you declared that you required with the getAnalysisUsage method. It takes a single template argument that specifies which pass class you want, and returns a reference to that pass. For example:

bool LICM::runOnFunction(Function &F) {
  LoopInfo &LI = getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
  //...
}

This method call returns a reference to the pass desired. You may get a runtime assertion failure if you attempt to get an analysis that you did not declare as required in your getAnalysisUsage implementation. This method can be called by your run* method implementation, or by any other local method invoked by your run* method.

A module level pass can use function level analysis info using this interface. For example:

bool ModuleLevelPass::runOnModule(Module &M) {
  //...
  DominatorTree &DT = getAnalysis<DominatorTree>(Func);
  //...
}

In above example, runOnFunction for DominatorTree is called by pass manager before returning a reference to the desired pass.

If your pass is capable of updating analyses if they exist (e.g., BreakCriticalEdges, as described above), you can use the getAnalysisIfAvailable method, which returns a pointer to the analysis if it is active. For example:

if (DominatorSet *DS = getAnalysisIfAvailable<DominatorSet>()) {
  // A DominatorSet is active.  This code will update it.
}

Implementing Analysis Groups

Now that we understand the basics of how passes are defined, how they are used, and how they are required from other passes, it’s time to get a little bit fancier. All of the pass relationships that we have seen so far are very simple: one pass depends on one other specific pass to be run before it can run. For many applications, this is great, for others, more flexibility is required.

In particular, some analyses are defined such that there is a single simple interface to the analysis results, but multiple ways of calculating them. Consider alias analysis for example. The most trivial alias analysis returns “may alias” for any alias query. The most sophisticated analysis a flow-sensitive, context-sensitive interprocedural analysis that can take a significant amount of time to execute (and obviously, there is a lot of room between these two extremes for other implementations). To cleanly support situations like this, the LLVM Pass Infrastructure supports the notion of Analysis Groups.

Analysis Group Concepts

An Analysis Group is a single simple interface that may be implemented by multiple different passes. Analysis Groups can be given human readable names just like passes, but unlike passes, they need not derive from the Pass class. An analysis group may have one or more implementations, one of which is the “default” implementation.

Analysis groups are used by client passes just like other passes are: the AnalysisUsage::addRequired() and Pass::getAnalysis() methods. In order to resolve this requirement, the PassManager scans the available passes to see if any implementations of the analysis group are available. If none is available, the default implementation is created for the pass to use. All standard rules for interaction between passes still apply.

Although Pass Registration is optional for normal passes, all analysis group implementations must be registered, and must use the INITIALIZE_AG_PASS template to join the implementation pool. Also, a default implementation of the interface must be registered with RegisterAnalysisGroup.

As a concrete example of an Analysis Group in action, consider the AliasAnalysis analysis group. The default implementation of the alias analysis interface (the basic-aa pass) just does a few simple checks that don’t require significant analysis to compute (such as: two different globals can never alias each other, etc). Passes that use the AliasAnalysis interface (for example the gvn pass), do not care which implementation of alias analysis is actually provided, they just use the designated interface.

From the user’s perspective, commands work just like normal. Issuing the command opt -gvn ... will cause the basic-aa class to be instantiated and added to the pass sequence. Issuing the command opt -somefancyaa -gvn ... will cause the gvn pass to use the somefancyaa alias analysis (which doesn’t actually exist, it’s just a hypothetical example) instead.

Using RegisterAnalysisGroup

The RegisterAnalysisGroup template is used to register the analysis group itself, while the INITIALIZE_AG_PASS is used to add pass implementations to the analysis group. First, an analysis group should be registered, with a human readable name provided for it. Unlike registration of passes, there is no command line argument to be specified for the Analysis Group Interface itself, because it is “abstract”:

static RegisterAnalysisGroup<AliasAnalysis> A("Alias Analysis");

Once the analysis is registered, passes can declare that they are valid implementations of the interface by using the following code:

namespace {
  // Declare that we implement the AliasAnalysis interface
  INITIALIZE_AG_PASS(FancyAA, AliasAnalysis , "somefancyaa",
      "A more complex alias analysis implementation",
      false,  // Is CFG Only?
      true,   // Is Analysis?
      false); // Is default Analysis Group implementation?
}

This just shows a class FancyAA that uses the INITIALIZE_AG_PASS macro both to register and to “join” the AliasAnalysis analysis group. Every implementation of an analysis group should join using this macro.

namespace {
  // Declare that we implement the AliasAnalysis interface
  INITIALIZE_AG_PASS(BasicAA, AliasAnalysis, "basic-aa",
      "Basic Alias Analysis (default AA impl)",
      false, // Is CFG Only?
      true,  // Is Analysis?
      true); // Is default Analysis Group implementation?
}

Here we show how the default implementation is specified (using the final argument to the INITIALIZE_AG_PASS template). There must be exactly one default implementation available at all times for an Analysis Group to be used. Only default implementation can derive from ImmutablePass. Here we declare that the BasicAliasAnalysis pass is the default implementation for the interface.

Pass Statistics

The Statistic class is designed to be an easy way to expose various success metrics from passes. These statistics are printed at the end of a run, when the -stats command line option is enabled on the command line. See the Statistics section in the Programmer’s Manual for details.

What PassManager does

The PassManager class takes a list of passes, ensures their prerequisites are set up correctly, and then schedules passes to run efficiently. All of the LLVM tools that run passes use the PassManager for execution of these passes.

The PassManager does two main things to try to reduce the execution time of a series of passes:

  1. Share analysis results. The PassManager attempts to avoid recomputing analysis results as much as possible. This means keeping track of which analyses are available already, which analyses get invalidated, and which analyses are needed to be run for a pass. An important part of work is that the PassManager tracks the exact lifetime of all analysis results, allowing it to free memory allocated to holding analysis results as soon as they are no longer needed.

  2. Pipeline the execution of passes on the program. The PassManager attempts to get better cache and memory usage behavior out of a series of passes by pipelining the passes together. This means that, given a series of consecutive FunctionPass, it will execute all of the FunctionPass on the first function, then all of the FunctionPasses on the second function, etc… until the entire program has been run through the passes.

    This improves the cache behavior of the compiler, because it is only touching the LLVM program representation for a single function at a time, instead of traversing the entire program. It reduces the memory consumption of compiler, because, for example, only one DominatorSet needs to be calculated at a time. This also makes it possible to implement some interesting enhancements in the future.

The effectiveness of the PassManager is influenced directly by how much information it has about the behaviors of the passes it is scheduling. For example, the “preserved” set is intentionally conservative in the face of an unimplemented getAnalysisUsage method. Not implementing when it should be implemented will have the effect of not allowing any analysis results to live across the execution of your pass.

The PassManager class exposes a --debug-pass command line options that is useful for debugging pass execution, seeing how things work, and diagnosing when you should be preserving more analyses than you currently are. (To get information about all of the variants of the --debug-pass option, just type “opt -help-hidden”).

By using the –debug-pass=Structure option, for example, we can see how our Hello World pass interacts with other passes. Lets try it out with the gvn and licm passes:

$ opt -load lib/LLVMHello.so -gvn -licm --debug-pass=Structure < hello.bc > /dev/null
ModulePass Manager
  FunctionPass Manager
    Dominator Tree Construction
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Memory Dependence Analysis
    Global Value Numbering
    Natural Loop Information
    Canonicalize natural loops
    Loop-Closed SSA Form Pass
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Scalar Evolution Analysis
    Loop Pass Manager
      Loop Invariant Code Motion
    Module Verifier
  Bitcode Writer

This output shows us when passes are constructed. Here we see that GVN uses dominator tree information to do its job. The LICM pass uses natural loop information, which uses dominator tree as well.

After the LICM pass, the module verifier runs (which is automatically added by the opt tool), which uses the dominator tree to check that the resultant LLVM code is well formed. Note that the dominator tree is computed once, and shared by three passes.

Lets see how this changes when we run the Hello World pass in between the two passes:

$ opt -load lib/LLVMHello.so -gvn -hello -licm --debug-pass=Structure < hello.bc > /dev/null
ModulePass Manager
  FunctionPass Manager
    Dominator Tree Construction
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Memory Dependence Analysis
    Global Value Numbering
    Hello World Pass
    Dominator Tree Construction
    Natural Loop Information
    Canonicalize natural loops
    Loop-Closed SSA Form Pass
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Scalar Evolution Analysis
    Loop Pass Manager
      Loop Invariant Code Motion
    Module Verifier
  Bitcode Writer
Hello: __main
Hello: puts
Hello: main

Here we see that the Hello World pass has killed the Dominator Tree pass, even though it doesn’t modify the code at all! To fix this, we need to add the following getAnalysisUsage method to our pass:

// We don't modify the program, so we preserve all analyses
void getAnalysisUsage(AnalysisUsage &AU) const override {
  AU.setPreservesAll();
}

Now when we run our pass, we get this output:

$ opt -load lib/LLVMHello.so -gvn -hello -licm --debug-pass=Structure < hello.bc > /dev/null
Pass Arguments:  -gvn -hello -licm
ModulePass Manager
  FunctionPass Manager
    Dominator Tree Construction
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Memory Dependence Analysis
    Global Value Numbering
    Hello World Pass
    Natural Loop Information
    Canonicalize natural loops
    Loop-Closed SSA Form Pass
    Basic Alias Analysis (stateless AA impl)
    Function Alias Analysis Results
    Scalar Evolution Analysis
    Loop Pass Manager
      Loop Invariant Code Motion
    Module Verifier
  Bitcode Writer
Hello: __main
Hello: puts
Hello: main

Which shows that we don’t accidentally invalidate dominator information anymore, and therefore do not have to compute it twice.

The releaseMemory method

virtual void releaseMemory();

The PassManager automatically determines when to compute analysis results, and how long to keep them around for. Because the lifetime of the pass object itself is effectively the entire duration of the compilation process, we need some way to free analysis results when they are no longer useful. The releaseMemory virtual method is the way to do this.

If you are writing an analysis or any other pass that retains a significant amount of state (for use by another pass which “requires” your pass and uses the getAnalysis method) you should implement releaseMemory to, well, release the memory allocated to maintain this internal state. This method is called after the run* method for the class, before the next call of run* in your pass.

Building pass plugins

As an alternative to using PLUGIN_TOOL, LLVM provides a mechanism to automatically register pass plugins within clang, opt and bugpoint. One first needs to create an independent project and add it to either tools/ or, using the MonoRepo layout, at the root of the repo alongside other projects. This project must contain the following minimal CMakeLists.txt:

add_llvm_pass_plugin(Name source0.cpp)

The pass must provide two entry points for the new pass manager, one for static registration and one for dynamically loaded plugins:

  • llvm::PassPluginLibraryInfo get##Name##PluginInfo();
  • extern "C" ::llvm::PassPluginLibraryInfo llvmGetPassPluginInfo() LLVM_ATTRIBUTE_WEAK;

Pass plugins are compiled and link dynamically by default, but it’s possible to set the following variables to change this behavior:

  • LLVM_${NAME}_LINK_INTO_TOOLS, when set to ON, turns the project into a statically linked extension

When building a tool that uses the new pass manager, one can use the following snippet to include statically linked pass plugins:

// fetch the declaration
#define HANDLE_EXTENSION(Ext) llvm::PassPluginLibraryInfo get##Ext##PluginInfo();
#include "llvm/Support/Extension.def"

[...]

// use them, PB is an llvm::PassBuilder instance
#define HANDLE_EXTENSION(Ext) get##Ext##PluginInfo().RegisterPassBuilderCallbacks(PB);
#include "llvm/Support/Extension.def"

Registering dynamically loaded passes

Size matters when constructing production quality tools using LLVM, both for the purposes of distribution, and for regulating the resident code size when running on the target system. Therefore, it becomes desirable to selectively use some passes, while omitting others and maintain the flexibility to change configurations later on. You want to be able to do all this, and, provide feedback to the user. This is where pass registration comes into play.

The fundamental mechanisms for pass registration are the MachinePassRegistry class and subclasses of MachinePassRegistryNode.

An instance of MachinePassRegistry is used to maintain a list of MachinePassRegistryNode objects. This instance maintains the list and communicates additions and deletions to the command line interface.

An instance of MachinePassRegistryNode subclass is used to maintain information provided about a particular pass. This information includes the command line name, the command help string and the address of the function used to create an instance of the pass. A global static constructor of one of these instances registers with a corresponding MachinePassRegistry, the static destructor unregisters. Thus a pass that is statically linked in the tool will be registered at start up. A dynamically loaded pass will register on load and unregister at unload.

Using existing registries

There are predefined registries to track instruction scheduling (RegisterScheduler) and register allocation (RegisterRegAlloc) machine passes. Here we will describe how to register a register allocator machine pass.

Implement your register allocator machine pass. In your register allocator .cpp file add the following include:

#include "llvm/CodeGen/RegAllocRegistry.h"

Also in your register allocator .cpp file, define a creator function in the form:

FunctionPass *createMyRegisterAllocator() {
  return new MyRegisterAllocator();
}

Note that the signature of this function should match the type of RegisterRegAlloc::FunctionPassCtor. In the same file add the “installing” declaration, in the form:

static RegisterRegAlloc myRegAlloc("myregalloc",
                                   "my register allocator help string",
                                   createMyRegisterAllocator);

Note the two spaces prior to the help string produces a tidy result on the -help query.

$ llc -help
  ...
  -regalloc                    - Register allocator to use (default=linearscan)
    =linearscan                -   linear scan register allocator
    =local                     -   local register allocator
    =simple                    -   simple register allocator
    =myregalloc                -   my register allocator help string
  ...

And that’s it. The user is now free to use -regalloc=myregalloc as an option. Registering instruction schedulers is similar except use the RegisterScheduler class. Note that the RegisterScheduler::FunctionPassCtor is significantly different from RegisterRegAlloc::FunctionPassCtor.

To force the load/linking of your register allocator into the llc/lli tools, add your creator function’s global declaration to Passes.h and add a “pseudo” call line to llvm/Codegen/LinkAllCodegenComponents.h.

Creating new registries

The easiest way to get started is to clone one of the existing registries; we recommend llvm/CodeGen/RegAllocRegistry.h. The key things to modify are the class name and the FunctionPassCtor type.

Then you need to declare the registry. Example: if your pass registry is RegisterMyPasses then define:

MachinePassRegistry RegisterMyPasses::Registry;

And finally, declare the command line option for your passes. Example:

cl::opt<RegisterMyPasses::FunctionPassCtor, false,
        RegisterPassParser<RegisterMyPasses> >
MyPassOpt("mypass",
          cl::init(&createDefaultMyPass),
          cl::desc("my pass option help"));

Here the command option is “mypass”, with createDefaultMyPass as the default creator.

Using GDB with dynamically loaded passes

Unfortunately, using GDB with dynamically loaded passes is not as easy as it should be. First of all, you can’t set a breakpoint in a shared object that has not been loaded yet, and second of all there are problems with inlined functions in shared objects. Here are some suggestions to debugging your pass with GDB.

For sake of discussion, I’m going to assume that you are debugging a transformation invoked by opt, although nothing described here depends on that.

Setting a breakpoint in your pass

First thing you do is start gdb on the opt process:

$ gdb opt
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.6"...
(gdb)

Note that opt has a lot of debugging information in it, so it takes time to load. Be patient. Since we cannot set a breakpoint in our pass yet (the shared object isn’t loaded until runtime), we must execute the process, and have it stop before it invokes our pass, but after it has loaded the shared object. The most foolproof way of doing this is to set a breakpoint in PassManager::run and then run the process with the arguments you want:

$ (gdb) break llvm::PassManager::run
Breakpoint 1 at 0x2413bc: file Pass.cpp, line 70.
(gdb) run test.bc -load $(LLVMTOP)/llvm/Debug+Asserts/lib/[libname].so -[passoption]
Starting program: opt test.bc -load $(LLVMTOP)/llvm/Debug+Asserts/lib/[libname].so -[passoption]
Breakpoint 1, PassManager::run (this=0xffbef174, M=@0x70b298) at Pass.cpp:70
70      bool PassManager::run(Module &M) { return PM->run(M); }
(gdb)

Once the opt stops in the PassManager::run method you are now free to set breakpoints in your pass so that you can trace through execution or do other standard debugging stuff.

Miscellaneous Problems

Once you have the basics down, there are a couple of problems that GDB has, some with solutions, some without.

  • Inline functions have bogus stack information. In general, GDB does a pretty good job getting stack traces and stepping through inline functions. When a pass is dynamically loaded however, it somehow completely loses this capability. The only solution I know of is to de-inline a function (move it from the body of a class to a .cpp file).
  • Restarting the program breaks breakpoints. After following the information above, you have succeeded in getting some breakpoints planted in your pass. Next thing you know, you restart the program (i.e., you type “run” again), and you start getting errors about breakpoints being unsettable. The only way I have found to “fix” this problem is to delete the breakpoints that are already set in your pass, run the program, and re-set the breakpoints once execution stops in PassManager::run.

Hopefully these tips will help with common case debugging situations. If you’d like to contribute some tips of your own, just contact Chris.

Future extensions planned

Although the LLVM Pass Infrastructure is very capable as it stands, and does some nifty stuff, there are things we’d like to add in the future. Here is where we are going:

Multithreaded LLVM

Multiple CPU machines are becoming more common and compilation can never be fast enough: obviously we should allow for a multithreaded compiler. Because of the semantics defined for passes above (specifically they cannot maintain state across invocations of their run* methods), a nice clean way to implement a multithreaded compiler would be for the PassManager class to create multiple instances of each pass object, and allow the separate instances to be hacking on different parts of the program at the same time.

This implementation would prevent each of the passes from having to implement multithreaded constructs, requiring only the LLVM core to have locking in a few places (for global resources). Although this is a simple extension, we simply haven’t had time (or multiprocessor machines, thus a reason) to implement this. Despite that, we have kept the LLVM passes SMP ready, and you should too.